pH, ORP, and Titration, Combination Electrodes
Cole-Parmer General Purpose pH Electrode, 100 Ohms Pt RTD, 10-ft Cable
General-purpose single-junction electrodes are economical yet accurate. Can be used for measurements up to pH 13. Maximum pressure is 150 psi at 25°>C.
Cole-Parmer Single-Junction ORP Electrode, Gold Sensor, 10-ft Cable
ORP electrodes measure oxidation/reduction levels in plating baths, waste water monitoring, and more. Use platinum-band electrodes for general-purpose applications from 23 to 212°>F (-5 to 100°>C). Use gold-disc electrodes for solutions containing cyanide from 23 to 230°>F (-5 to 110°>C).
Cole-Parmer Tuff-Tip pH Electrode; 100 Ohm PT RTD (Tinned Ends), BNC, 3/4"
Don't worry about bulb breakage, the unique Tuff-Tip design helps protect bulbs. Choose chemical-resistant Ryton PPS standard electrode or with graphite tip. Eliminate electrical noise with graphite-tipped models. Ideal for viscous or severe applications, these electrodes reduce contamination and clogging with uniform pore size.
Cole-Parmer Oakton Single-junction, semi-dome, polygel reference, temperature sensor w/ waterproof connection (Anthony) pH electrode, 100C, 12 mm x 115mm,30K ATC.
Replace electrodes when they break, no longer hold calibration, cannot be rehydrated, or are not compatible with your sample.
Bellco Glass, Inc. Dissolved oxygen and PH electrodes are the eyes and ears for many biotechnology processes. High quality sensors are required for critical measurement and Hamilton sensors are some of the finest in the world. Bellco offers Hamilton gel-filled PH and stainl
Dissolved oxygen and PH electrodes are the eyes and ears for many biotechnology processes. High quality sensors are required for critical measurement and Hamilton sensors are some of the finest in the world. Bellco offers Hamilton gel-filled PH and stainl
Research Products International Corp Replacement pH Electrode for Checker 1 pH Tester
The spare pH electrode for the Checker pH meter. Replacing the pH electrode is both quick and easy. Simply unscrew the old probe to be replaced and screw on the new one.
Bellco Glass, Inc. The fermprobe pH electrode with s8 metric cap features a standard s8 detachable cable connector on a metric pg 135 threaded polymer cap the design requires the rotation of the electrode during installation this style of pH Fermprobe is the first choice fo
The fermprobe pH electrode with s8 metric cap features a standard s8 detachable cable connector on a metric pg 135 threaded polymer cap the design requires the rotation of the electrode during installation this style of pH Fermprobe is the first choice fo
Cole-Parmer Oakton Ion Selective Electrode (ISE), Single-Junction, Epoxy; Chloride
A wide variety of ion selective electrodes are availabe to suit a wide array of applications. Select from four electrode types: membrane, solid-state, gas sensing, and glass bulb; typical response time is 20 to 30 seconds. Epoxy-body ISEs are either single- or double-junction, and the glass-body type is double junction.
Cole-Parmer Oakton ORP Electrode, Epoxy, Single-Junction; 10 ft cable
Replace electrodes when they break, no longer hold calibration, cannot be rehydrated, or are not compatible with your sample.
Cole-Parmer Oakton Replacement Electrode Holder Attachment for Use with Portable Meters
Replace electrodes when they break, no longer hold calibration, cannot be rehydrated, or are not compatible with your sample. For your convenience, cables, power adapters, and other accessories are available for your Oakton meters and pocket testers.
Hach Company Radiometer Analytical XC161-9 Combination pH Electrode for Microsamples (d=5 mm, glass body, screw cap)
The Radiometer XC161 Combination pH Electrode has a glass body, Ag/AgCl reference system, refillable electrolyte (3M KCl + sat. AgCl) and micro diameter (5 mm) for small volume sample measurements. The XC161 is a screw cap electrode and requires the CL114 cable (part no. A94L114) for compatibility with Hach Sension+ laboratory pH meters.
Hach Company Radiometer Analytical M295Ag Metal Electrode (silver rod sensor, PTFE body, banana plug)
The Radiometer M295Ag Metal Electrode has a PTFE body and silver rod sensor. It is recommended for silver halide titrations. The M295Ag has a fixed 1 meter cable with banana plug.
Hach Company Radiometer Analytical PHC2051-8 Combination Red-Rod pH Electrode with robust glass sensor (glass body, BNC)
The Radiometer PHC2051-8 Combination pH Electrode has a glass body, Red-Rod reference system, refillable electrolyte (sat. KCl) and porous pin junction. The PHC2051-8 has a special thick glass membrane for measurement in soils or other applications requiring a robust sensor. The PHC2051-8 is compatible with Hach Sension+ laboratory pH meters (or any meter with a BNC connection).